November Issue of Downshifts is out!

The SCCV newsletter. Post here to communicate with the editor about articles you would like to write, etc.
Post Reply
User avatar
gtivr4
Posts: 851
Joined: Thu Jun 26, 2003 2:03 pm
Location: Essex, VT
Contact:

November Issue of Downshifts is out!

Post by gtivr4 »

Its been a long time coming, and sadly there have been very few contributions (only one other than myself). Hopefully everyone enjoys what I have put together though. I enjoy doing this, and hope that this isn't the final issue of downshifts ever (although I suspect it might be).

Anyways, enjoy!
Image


Here is a link to the PDF (2.3mb)
http://www.photoapex.net/sccv/SCCVDownshifts1107.pdf

And a higher resolution version (5.5mb)
http://www.photoapex.net/sccv/SCCVDowns ... -hires.pdf
Nathan Dana
1990 Miata, 1992 Volvo Cow, 1997 Sonoma, 2012 Locost 7
User avatar
skivittlerjimb
Posts: 538
Joined: Sat May 06, 2006 6:56 pm

Post by skivittlerjimb »

Great job on this issue, Nathan. =D>

Looking forward to reading it more thoroughly, but it looks great!

I hope it's not our last issue, either. I'd be happy to contribute a Hillclimb Newbie article I already have pretty much written for the next issue.

-Jim B.
'92 GVR4 280/1000
User avatar
Rabbit Farmer
SCCV Board Advisor
SCCV Board Advisor
Posts: 5193
Joined: Wed Jun 25, 2003 11:37 pm
Location: Milton, Vermont
Contact:

Post by Rabbit Farmer »

Looks good. I IM'ed you one correction. What about the Les Bradford article? I thought he had submitted it.

S
Steve #702
Go Fast VW & Audi parts at FastAddiction.com
It takes hundreds of nuts to hold a car together, but it takes only one of them to scatter it all over the highway. - Evan Esar
User avatar
darTTh audi
Posts: 162
Joined: Sun Aug 07, 2005 3:58 pm
Location: Essex Junction, VT

Post by darTTh audi »

skivittlerjimb wrote:Great job on this issue, Nathan. =D>

Looking forward to reading it more thoroughly, but it looks great!
Ditto here. Still reading through it. Very nice graphically.
Bill R.
2008 Audi TT 3.2q
Post Reply