New project a comin' Part Deux
-
Rooster
- Posts: 250
- Joined: Sun Jun 19, 2005 2:32 pm
- Location: Manch-Vegas
Re: New project a comin' Part Deux
More pics!
1982 - Fiat Bertone X-1/9 (Bumble Bee)
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
-
Rooster
- Posts: 250
- Joined: Sun Jun 19, 2005 2:32 pm
- Location: Manch-Vegas
Re: New project a comin' Part Deux
More work on the RaceX. Having a heated garage is awesome!
The racing logo:
The engine rebuild is slightly "stalled". awaiting new hardware, but I have a little bit of time for that.
The racing logo:
The engine rebuild is slightly "stalled". awaiting new hardware, but I have a little bit of time for that.
1982 - Fiat Bertone X-1/9 (Bumble Bee)
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
-
Rabbit Farmer
- SCCV Board Advisor
- Posts: 5195
- Joined: Wed Jun 25, 2003 11:37 pm
- Location: Milton, Vermont
- Contact:
Re: New project a comin' Part Deux
I am really really liking this project.
(good seeing you at the last meeting)
(good seeing you at the last meeting)
Steve #702
Go Fast VW & Audi parts at FastAddiction.com
It takes hundreds of nuts to hold a car together, but it takes only one of them to scatter it all over the highway. - Evan Esar
Go Fast VW & Audi parts at FastAddiction.com
It takes hundreds of nuts to hold a car together, but it takes only one of them to scatter it all over the highway. - Evan Esar
-
MX5 Driver
- SCCV Webmaster
- Posts: 1597
- Joined: Wed Jun 25, 2003 11:37 pm
- Location: Vermont
Re: New project a comin' Part Deux
Nice, a race car in the summer and a snow plow in the winter... Very utilitarian Mike.
Tim W.
SCCV #72
SCCV #72
-
Rabbit Farmer
- SCCV Board Advisor
- Posts: 5195
- Joined: Wed Jun 25, 2003 11:37 pm
- Location: Milton, Vermont
- Contact:
Re: New project a comin' Part Deux
Really like the super light rims.
Steve #702
Go Fast VW & Audi parts at FastAddiction.com
It takes hundreds of nuts to hold a car together, but it takes only one of them to scatter it all over the highway. - Evan Esar
Go Fast VW & Audi parts at FastAddiction.com
It takes hundreds of nuts to hold a car together, but it takes only one of them to scatter it all over the highway. - Evan Esar
-
Rooster
- Posts: 250
- Joined: Sun Jun 19, 2005 2:32 pm
- Location: Manch-Vegas
Re: New project a comin' Part Deux
Thanks Steve, it was great to meet up with the gang again!
Oh, and nope, can't snowplow with it, it wouldn't last a winter...
Oh, and nope, can't snowplow with it, it wouldn't last a winter...
1982 - Fiat Bertone X-1/9 (Bumble Bee)
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
-
Rooster
- Posts: 250
- Joined: Sun Jun 19, 2005 2:32 pm
- Location: Manch-Vegas
Re: New project a comin' Part Deux
Just a little tidbit. I've been plugging away at the more complicated things. Like camber plates and the fuel cell. The fuel cell is completely installed and fuel lins run up front. All camber plates are mocked up.
Next on the list is to install Koni race suspension from the BumbleBee and mount the suspension.Once its on all fours, I can start to finish the engine...
Project completion is slated for May 1st.
Next on the list is to install Koni race suspension from the BumbleBee and mount the suspension.Once its on all fours, I can start to finish the engine...
Project completion is slated for May 1st.
1982 - Fiat Bertone X-1/9 (Bumble Bee)
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
-
Rooster
- Posts: 250
- Joined: Sun Jun 19, 2005 2:32 pm
- Location: Manch-Vegas
Re: New project a comin' Part Deux
More updates. Here is the raceX waiting at the shop for a full cage:
Said full cage being fabricated and installed:
Should come home this week. Next is engine and trans install. With a cage like this, it'll be real hard to resist hill climbs...
Said full cage being fabricated and installed:
Should come home this week. Next is engine and trans install. With a cage like this, it'll be real hard to resist hill climbs...
Last edited by Rooster on Mon May 21, 2012 10:06 am, edited 1 time in total.
1982 - Fiat Bertone X-1/9 (Bumble Bee)
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
-
sachilles
- Posts: 2666
- Joined: Thu Jun 26, 2003 3:11 pm
- Location: Waitsfield, VT
Re: New project a comin' Part Deux
Now you are talking.Rooster wrote:
Should come home this week. Next is engine and trans install. With a cage like this, it'll be real hard to resist hill climbs...
Looking good.
Sachilles
02 Subaru impreza sedan made from spare parts (Scrappy)
05 Subaru Legacy GT (Rosie)
02 Subaru impreza Wagon (Mr. the King)
96 Chevy Conversion van (Vango)
02 Subaru impreza sedan made from spare parts (Scrappy)
05 Subaru Legacy GT (Rosie)
02 Subaru impreza Wagon (Mr. the King)
96 Chevy Conversion van (Vango)
-
Rooster
- Posts: 250
- Joined: Sun Jun 19, 2005 2:32 pm
- Location: Manch-Vegas
Re: New project a comin' Part Deux
sachilles wrote:Now you are talking.Rooster wrote:
Should come home this week. Next is engine and trans install. With a cage like this, it'll be real hard to resist hill climbs...
Looking good.
LOL, I still dont know...
1982 - Fiat Bertone X-1/9 (Bumble Bee)
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P
1979 - Fiat X-1/9 (The Booger)
2012 - Fiat Abarth (The black Pearl) -R.I.P