VEMS has Vermont's First AWD Dyno

If you know of a good auto shop that you trust, or you provide automotive related services for let everyone know about it here.
User avatar
6speed
Rotary Nut
Posts: 188
Joined: Tue Jul 01, 2003 9:01 pm
Location: Colchester, VT
Contact:

VEMS has Vermont's First AWD Dyno

Post by 6speed »

Not only do we have Vermont's first AWD dyno, it's also Vermont's first load absorbing dyno. Need to investigate a lean spot at 3500 rpm and 6 psi of boost? No problem, we can hold the car at that exact location! This is an incredible diagnostic and tuning tool. In order to keep costs low, to you and to us, we have the dyno in Vermont approximately every other month. For 2012, it's March, May, July, September, and November. The Land and Sea hub dyno is top of the line and new to the market.

email jason@vems.us (or pm me here, or call 802-893-8788) to schedule an appointment.

Jason, the owner, has been involved with SCCV in varying capacities since 1999.

Stop by our new location at 158 Brentwood Drive, Suite 1 in Colchester (across Rt 7 from the Colchester/Milton Park and Ride we often meet at for karting/SLMP trips). We are open Monday and Wednesday eves from 6pm until around 11pm, Friday eve by appointment, and Saturday all day.

Dyno-only Rates:
Baseline - $100 2wd, $125 AWD
2wd hourly - $125
AWD hourly - $150
For half or full days, contact us.

Tuning:
VEMS Tuning - $75/hr
Subaru/Mitsubishi Open Source - $100/hr
Other standalones/flash tunes - $150/hr

An example: Subaru fuel injector replacement scaling with dyno verification, $250.

Important information to have when you contact us: wheel bolt pattern, 2wd or AWD, and the type of engine management (if you want it tuned).

All parts have a 5% Discount if you're a SCCV member. We stock fuel injectors, wideband sensors, wideband controllers, standalone ECUs, wiring, heatshrink, injector connectors, generic sealed connectors, boost control valves, and much more.

Thanks for considering us for your tuning and performance needs.
Image
Jason Russell
1988 RX7 Turbo
VEMS Engine Management retailer/installer
User avatar
Rabbit Farmer
SCCV Board Advisor
SCCV Board Advisor
Posts: 5193
Joined: Wed Jun 25, 2003 11:37 pm
Location: Milton, Vermont
Contact:

Re: VEMS has Vermont's First AWD Dyno

Post by Rabbit Farmer »

Looking forward to seeing the new facility and dyno. Cabriolet needs some tuning to give it more go!
Steve #702
Go Fast VW & Audi parts at FastAddiction.com
It takes hundreds of nuts to hold a car together, but it takes only one of them to scatter it all over the highway. - Evan Esar
User avatar
DaveP189
Posts: 700
Joined: Sun Aug 31, 2008 11:05 pm
Location: Massena via Malletts Bay

Re: VEMS has Vermont's First AWD Dyno

Post by DaveP189 »

Good to know! =D>
(will pass the info around NNY for you, Jason)
Dave P. #189 '02 MINI CooperS+ "Elphie"
"People who dance are considered insane by those who can't hear the music." -unknown
User avatar
sachilles
Posts: 2666
Joined: Thu Jun 26, 2003 3:11 pm
Location: Waitsfield, VT

Re: VEMS has Vermont's First AWD Dyno

Post by sachilles »

Need to get my rear diff bushing fixed, so I can get back on there.
Sachilles
02 Subaru impreza sedan made from spare parts (Scrappy)
05 Subaru Legacy GT (Rosie)
02 Subaru impreza Wagon (Mr. the King)
96 Chevy Conversion van (Vango)
User avatar
ryed
SCCV Board Advisor
SCCV Board Advisor
Posts: 617
Joined: Sat Nov 17, 2007 2:13 pm
Location: Warren, VT

Re: VEMS has Vermont's First AWD Dyno

Post by ryed »

Need to save $$$ so I can get Joey to install the new turbo & downpipe, and get the outback tuned here! Hopefully by May...
1991 Alpine White GTI VRT "Polar Express"
2012 Ford F150 Ecoboost "Tullibee"
2017 VW Alltrack "Betty White"
"Never run out of real estate, traction and ideas at the same time" - Unknown
User avatar
lawdogg
Posts: 380
Joined: Tue Dec 13, 2005 11:10 pm
Location: San Francisco, CA
Contact:

Re: VEMS has Vermont's First AWD Dyno

Post by lawdogg »

No way!! Awesome!! \:D/
Il faut voir pour savoir
User avatar
TSR53
Posts: 158
Joined: Fri Dec 31, 2004 11:51 am

Re: VEMS has Vermont's First AWD Dyno

Post by TSR53 »

Nice, I spy an Audi ur-quattro :D with a raised rear wing, european one-piece lights (Bosch units? or Cibiés) and Narago Blue paint? Looks like a 1987 Audi 5000CS turbo quattro rim on the floor. Hmmm, needs 15x8 Ronal R8s...

Nice looking dyno, I'll have to stop by and meet and greet.
User avatar
sachilles
Posts: 2666
Joined: Thu Jun 26, 2003 3:11 pm
Location: Waitsfield, VT

Re: VEMS has Vermont's First AWD Dyno

Post by sachilles »

Going on the dyno tomorrow night with the Legacy.
Sachilles
02 Subaru impreza sedan made from spare parts (Scrappy)
05 Subaru Legacy GT (Rosie)
02 Subaru impreza Wagon (Mr. the King)
96 Chevy Conversion van (Vango)
User avatar
Rabbit Farmer
SCCV Board Advisor
SCCV Board Advisor
Posts: 5193
Joined: Wed Jun 25, 2003 11:37 pm
Location: Milton, Vermont
Contact:

Re: VEMS has Vermont's First AWD Dyno

Post by Rabbit Farmer »

Dropping off my car this week.

I see Jeff's turbo Miata is down there also. :drive1:
Steve #702
Go Fast VW & Audi parts at FastAddiction.com
It takes hundreds of nuts to hold a car together, but it takes only one of them to scatter it all over the highway. - Evan Esar
User avatar
sachilles
Posts: 2666
Joined: Thu Jun 26, 2003 3:11 pm
Location: Waitsfield, VT

Re: VEMS has Vermont's First AWD Dyno

Post by sachilles »

I don't think my legacy generated any love for Automatics :lol:
Jason got the legacy(Rosie) all nice and tuned.
I'm not sure how to describe it. Ludicrous, ridiculous fun. Substantially more power, noticeable at all times, but nice and smooth.
Think Rhonda would notice if I switched this motor to the race car, and put the race car motor in the legacy?

Shop is nice and roomy. Could probably have a nice soccer game in there.

Image
Sachilles
02 Subaru impreza sedan made from spare parts (Scrappy)
05 Subaru Legacy GT (Rosie)
02 Subaru impreza Wagon (Mr. the King)
96 Chevy Conversion van (Vango)
Post Reply